Univers Mac Interactif 52/Univers Mac Interactif - Issue 52.iso/JOURNAUX/infomacv13-114.txt

Internet Message Format | 1995-11-13 | 26KB

Date: Wed,  4 Oct 95 19:00:03 PDT
From: The Info-Mac Moderators <[e-mail]>
Reply-To: [e-mail]
Subject: Info-Mac Digest V13 #114
To: info-mac-list
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="Info-Mac-Digest"

--Info-Mac-Digest


Info-Mac Digest             Wed,  4 Oct 95       Volume 13 : Issue 114

Today's Topics:

      [*] CHNrxnCALCv1.5
      [*] CW TCL Port Package 1.9
      [*] French Pronunciation Practice and French Pronunciation Quiz
      [*] Frontier/AnArchie glue file
      [*] GeoDraw USA
      [*] grafikkonverter 2.2
      [*] guide to xcmds 1.5
      [*] Internet MacLang 4.0
      [*] Launch O matic 1.0B2
      [*] Monitors Resolution FKEY 1.0
      [*] OJ SIMPSON VERDICT LIVE SAMPLE!
      (Q) pub for PB & PB Duo users?
      1.6 M disks
      7.5 won't install
      [A] Word 5.1--System Memory too low??
      [Q] Utility to open multiple files at once?
      Alert Sounds.
      CorelDRAW! reader for Mac
      Info-Mac Digest V13 #105
      Info-Mac Digest V13 #112
      Info-Mac Problems on eWorld
      Macsbug: duplicate dcmds/named Vol/VBL/Printf/File/Drvr
      PlainTalk Capabilities
      Quadra 610 Ethernet
      System 7.5.1 update problem: Mac IIcx

The Info-Mac Network operates by the volunteer efforts of:
Bill Lipa, Gordon Watts, Liam Breck, Igor Livshits, Adam C. Engst

The Info-Mac Archive is available at 50 public and private sites around
the world.  For the site list, request it by mail (address below), or try:
  <ftp://mirrors.aol.com/pub/info-mac/help/mirror-list.txt>
Also accessible by ftp.  Help files and indexes are also in info-mac/help/.

Administrative queries & info: <mailto:[e-mail]>
Articles for digest publication: <mailto:[e-mail]>
Files for inclusion: <mailto:[e-mail]>

To submit a file greater than 800K, or to avoid submitting by (and
segmenting for) email, send email describing the file to
<mailto:[e-mail]> and upload it to:
  <ftp://daemon.ncsa.uiuc.edu/Incoming/>
As with emailed submissions, non-text files must be binhexed.

----------------------------------------------------------------------

--Info-Mac-Digest
Content-Type: multipart/digest; boundary="----------------------------"
Content-Disposition: attachment; filename="Info-Mac Digest V13 #114"

------------------------------

Date: Wed, 4 Oct 1995 11:30:22 -0600
From: RGSW <[e-mail]>
Subject: [*] CHNrxnCALCv1.5

This is a FileMaker Pro Database file for performing CHN
calculations as well as reaction setup calculation. I created
this file myself and it is freeware. It has a nice interface
as well as a quick CHN calculation with an impurity range
calculator.

[Archived as /info-mac/sci/chn-calc-15-fm.hqx; 38K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:38 -0600
From: Marty Wachter <[e-mail]>
Subject: [*] CW TCL Port Package 1.9

Porting kit for using the THINK CLASS LIBRARY 2.0.6 under the Codewarrior
7 IDE.  Use earlier version of the port kit for earlier versions of
Codewarrior.

-Marty

[Archived as /info-mac/dev/lib/cw-tcl-port-19.hqx; 129K]

------------------------------

Date: Wed, 4 Oct 1995 12:15:51 -0600
From: [e-mail] (Charles Gidney)
Subject: [*] French Pronunciation Practice and French Pronunciation Quiz

This folder is a collection of HyperCard=81 stacks illustrating the
pronunciation of French vowels, consonants and essential optional and
required liaisons.   French Pronunciation Practice (FPP) and its companion
stack French Pronunciation Quiz (FPQ) are HyperCard=81 Stacks which make use
of sound stacks HyperSound=811 and HyperSound=812 which I recorded using
MacRecorder=81.   The sound stacks contain the words and phrases illustrated
by FPP and FPQ stacks.  The remaining stacks (Combos, Consonants and
Vowels) contain the text of the presentation.  Pierre Delattre's Principes
de Phon=E9tique was used as reference for liaisons.

[Archived as /info-mac/app/edu/french-pronunciation-hc.hqx; 1659K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:29 -0600
From: [e-mail] (World Domination Headquarters)
Subject: [*] Frontier/AnArchie glue file

Not sure if oyu guys peddle in this stuff, but I have a glue file for
Anrchie for use with Frontier which fixes a number of errors in versions
currently available. If you distribute this sort of stuff please take.
Thanks,
Sean
Infant Software

[Archived as /info-mac/dev/osa/anarchie-frontier-glue.hqx; 10K]

------------------------------

Date: Wed, 4 Oct 1995 12:16:15 -0600
From: [e-mail]
Subject: [*] GeoDraw USA

GeoDraw USA is a HyperCard stack. It allows geography students to become
cartographers as they study one of the United States. They are directed to
use atlases and other resources to find and "paint" physical and political
information on a blank map. GeoDraw USA is shareware. This is a demo version.
GeoDraw USA requires HyperCard or HyperCard Player 2.x.
Steve Gandy

[Archived as /info-mac/app/edu/geo-draw-usa-hc-demo.hqx; 64K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:21 -0600
From: Stefan Brix <[e-mail]>
Subject: [*] grafikkonverter 2.2

GraphicConverter converts almost every grafic format of Macs,
PCs, Unix-Machines, Ataris, ... into almost every other format.
Registered users (shareware!) can manipulate the pictures in
many ways, though the Grafikkonverter is no "Photoshop".

This update includes the following bug-fixes/features:
Version 2.2
*JPCD import added (Kodak Photo CD)
*Jbug in slide show fixed
*JST-X import
*Jprotocol works in convert more
*Jdrag manager enclosed in complete package
*Jbug in HPGL import fixed
*Jresolution detection in TIFFs works with cm
*Jzoom with cmd + space
*Jbug in import of 32 bit IMGs fixed

If there are any bugs/problems, Thorsten Lemke can be reached
directly via e-mail:
[e-mail]
     or
[e-mail] (mail-size must be less than 16K!)

Tschuess / bye, Stefan

[Archived as /info-mac/gst/grf/graphic-converter-22-de.hqx; 1612K]
[Archived as /info-mac/gst/grf/graphic-converter-22-fr.hqx; 1579K]
[Archived as /info-mac/gst/grf/graphic-converter-22-updt.hqx; 446K]
[Archived as /info-mac/gst/grf/graphic-converter-22.hqx; 1587K]
[Archived as /info-mac/gst/grf/graphic-converter-de-updt.hqx; 455K]
[Archived as /info-mac/gst/grf/graphic-converter-fr-updt.hqx; 457K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:45 -0600
From: [e-mail] (matt neuburg)
Subject: [*] guide to xcmds 1.5

This is the catalog of my own collection of XCMDs. It is
distributed for two reasons: (i) you can use it to keep
track of your own collection, as it has a number of cool but
simple features; (ii) it gives you some idea
what XCMDs (public) are out there --
that is, it helps to answer the question, "is there an XCMD
to...?". The list is necessarily selective and finite, but
it could be pretty helpful; it has become a sort of
unofficial FAQ for this form of question.

Note that no XCMDs are included with the stack, and that I
cannot send any. To find XCMDs, you
should try mirrors of sumex & umich, and the HyperStacks
CD from Pacific Hi-Tech ([e-mail]).

Changes in v1.5: more XCMDs; squashed some bugs.
I believe the simulation of the List Manager now
works acceptably on both fast and slow machines.

[Archived as /info-mac/dev/card/guide-to-xcmds-15-hc.hqx; 108K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:42 -0600
From: "Antreas P. Hatzipolakis" <[e-mail]>
Subject: [*] Internet MacLang 4.0

Internet-MacLang v. 4.0: This is a DocMaker format stand-alone
document, which contains information about Internet free
Macintosh  Prog. Languages.
Version 4.0 revised and updated (with additions).
Used fonts: Apple US System 7.5

Antreas P. Hatzipolakis
[e-mail]

[Archived as /info-mac/dev/info/internet-mac-lang-40.hqx; 166K]

------------------------------

Date: Wed, 4 Oct 1995 11:45:26 -0600
From: "The O'Keefes" <[e-mail]>
Subject: [*] Launch O matic 1.0B2

Launch O Matic 1.0B2 is an awsome utility that allows an interesting way
of opening applications when you want them to. This new version is
faster, easier, and supports drag and drop text(just press the option
key)  It has a beautiful interface, and includes some instructions.
Nice! By Petersoft Multimedia!

[Archived as /info-mac/disk/launch-o-matic-10b2.hqx; 148K]

------------------------------

Date: Wed, 4 Oct 1995 11:30:24 -0600
From: [e-mail] (Matt Slot)
Subject: [*] Monitors Resolution FKEY 1.0

After a few weeks of playing Marathon, I was sick of swapping resolutions
on my multiscan monitor... and tried to think of a cool way to shortcut the
process. I loved the "ToggleSndVol FKEY", and was inspired to do something
similar.

The FKEY is packaged as a Font suitcase... Simply place the file in the Fonts
folder of System 7.1 or later -- no need to reboot! The FKEY is activated
by pressing Command-Shift-Zero (ala FKEY zero) in any application.

This software requires the Display Manager 1.2, which is bundled with System
7.5.2 (as installed on the PM7200, PM7500, and PM8500). If you dont have
7.5.2 or the updater... you need to get the software from Apple's FTP site
(it's free!) at:

  <ftp://ftptoo.support.apple.com/pub/apple_sw_updates/US/mac/
      display_periph_sw/MultipleScan%20Display%20SW%201.2.hqx>

Its free to download and redistribute... but if you find yourself using it
*all* the time, you could consider sending me $5 or $10 as guiltware. :)

Matt Slot ([e-mail]) - 10/3/95

PS - Watch for a Monitors AppleScript Extension... coming soon!

[Archived as /info-mac/gui/monitors-resolution-10-fkey.hqx; 17K]

------------------------------

Date: Wed, 4 Oct 1995 12:01:17 -0600
From: Jeff Click <[e-mail]>
Subject: [*] OJ SIMPSON VERDICT LIVE SAMPLE!

Finally!  The long-awaited verdict of the trial of the century is out and
ready for your Mac!  Here is the verdict of the OJ trial sampled LIVE as
it happened.  It is a 22kHz sample, excellent quality!  It is the
complete verdict, from when Judge Ito told OJ to stand, down to the final
announcement of the second "Not Guilty" verdict.

If this file is too large for you to download, you can download the
smaller sample here, or at the CLIXSOUNDS web site at:
http://johnb.icon.net/clix/index.html.

[Archived as /info-mac/art/snd/oj-verdict-samle.hqx; 648K]
[Archived as /info-mac/art/snd/oj-verdict-samle-short.hqx; 296K]

------------------------------

Date: Wed, 4 Oct 95 08:06:22 CDT
From: "Joshua B. Colglazier" <[e-mail]>
Subject: (Q) pub for PB & PB Duo users?

Does anyone know if there is a publication specifically for
PowerBook and PowerBook Duo users?  If so, please let me
know and post here.  Thanks!

------------------------------

Date: Wed, 4 Oct 1995 11:28:36 -0400
From: Saeed Khan <[e-mail]>
Subject: 1.6 M disks

>> More calls to MSS. Get info that of the 13 install disks, only Disk 1 is
>> 1.44MB, the other are 1.6MB DMF-and this is not readable by Apple
>> SuperDrive!

>This is the first time I hear of 1.6M DMF disks. Does anybody have more info
>on what exactly these beasts are?

>From my understanding, 1.6 M disks are either 1.44 MB disks which make
use of some unused tracks, or are manufactured slightly differently
to increase capacity somewhat. I think they are the former.

Anyway, in an attempt to copy protect the floppy version of Windoze,
Microsoft designed the installion routine with Disk1 as a normal 1.44
floppy and the rest as 1.6M floppies.

Disk1, changes some settings/parameters (I'm not a windoze guy) in
windows so it can read the 1.6M floppies. At the end of the installation,
the settings/parameters are changed back so windows can read 1.44
floppies.

Hope this helps.


Saeed Khan
[e-mail]

------------------------------

Date: Wed, 4 Oct 1995 09:52:28 +0100
From: [e-mail] ([e-mail])
Subject: 7.5 won't install

In digest 112, Lyman Green wrote :

>Date: Mon, 02 Oct 1995 11:42:37 +0100
>From: [e-mail] (Lyman C. Green, Jr.)
>Subject: 7.5 won't install on q700 blank HD
>
>(A copy of this message has also been posted to the following newsgroups:
>comp.sys.mac.apps, duke.systems.macintosh)
>
>Hm.  I can't really think of what could be causing this problem, so
>thought I'd pose it to y'all.
>Setup: Q700 20/400
>I just re-formatted the drive into two partitions with FWB's HDT Primer
>1.7, from the Personal Edition.  I password protected one partition and
>all seemed to go well with format, etc.  Took out the 7.5 floppies, and
>ran a custom install of 7.5 on the machine.  At disk 6 or 7 (forget which
>the first time) it asked for Disk 1.  I inserted, and the installation
>came to a halt with an error message like: "An error occurred during
>installation, the disk has not been touched" or something similar.  I
>think some of you MUST have seen this before... :)  This is an install
>onto a BLANK 200 MB partition, and I booted off of the Install 1 disk.  I
>thought perhaps the disks were corrupt somewhere, or that the custom
>install did something wrong.  I tried again, first just doing a easy
>install.  No luck.
>Ok, maybe the disks are corrupt.  Got my CD out, and made fresh disks out
>of the images on the CD upgrade.  Ran it through, and it died again, this
>time for sure at disk 6, right after 'rebuilding the correct desktop
>pattern'.  Tested the partition I wanted to install on with Disk First
>Aid.  Still no sign of trouble.
>Cannot think what would cause this weirdness??
>
>I am going to try zapping the PRAM and see if that helps.  There is NO
>desktop file to speak of, since it's a empty disk.
>Any help is gratefully taken, and thanked for, in advance.
>--

We had this problem on an LC630.  Apparently, it occurs with *some* types
of hard disk and not with others.  Ours was a 500 Mb disk and the techie
told me that Apple managed to put 7.5 on these disks in the factory but
that there was no way you could install 7.5 on one of these disks which had
previously been set up with 7.1.  The failure occurs when the installer is
trying to build the system file, but I don't know any more than that.
In our case, the machine was under warranty so the disk was replaced free
and we now have 7.5 up and running and no more problems.



Dr. John Williams

INRA Station de Recherches Avicoles, Centre de Recherches de Tours, 37380
Nouzilly, France

Tel [phone]    Fax/telecopie (33) 47 42 77 78

------------------------------

Date: Wed, 4 Oct 1995 17:23:38 -0400
From: [e-mail] (Geoffrey Meissner)
Subject: [A] Word 5.1--System Memory too low??

I am using Word 5.1a and System 7.5 and had the same problem.  If you have
Now Utilities, you can avoid the trouble of opening the trash by setting
Now Startup Manager to reserve 1% of the system heap space.  Since I did
that, the problem has disappeared.


>I have the same problem with Word 5.1.  It's not an extension problem
>because the same problem exists with the extensions off.  As near as I can
>tell, it's a System 7.5 problem.  I started experiencing it right after I
>upgraded from 7.1 to 7.5.  I'm surprized he sees this same problem running
>7.1.
>
>I didn't know that opening the trash worked to clear it up.  I have found
>that just starting and quitting *any* application will solve this problem,
>and Word 5.1 will start without the error message.  As you alluded to,
>this is a small compared to the headaches of Word 6!  I'll stick with this
>minor inconvience and Word 5.1 any day!
>
>
>> From: [e-mail]
>> Subject: Word 5.1--System Memory too low??
>>
>> Anyway, the first time he tries to run Word after starting up,
>> he gets an error message: System memory too low to run Word.
>> Try reducing Word's memory size.
>>
>> At random, he discovered that if he opened and closed the
>> Trash can, he could then launch Word sucessfully.
>>


Geoffrey Meissner
[e-mail]

------------------------------

Date: Wed, 4 Oct 1995 08:10:00 -0500
From: [e-mail] (Clinton MacDonald)
Subject: [Q] Utility to open multiple files at once?

Friends:

   I was wondering if anyone knows of the following type of utility: what I
would like is a DragThing- or Malph-type utility which let me link several
files, applications or folders into a single icon. I would like to be able
to start (say) Eudora and BBEdit at the same time, or to open three shared
disks with one click. Do you know of such a critter? Does DragThing or one
of the others have this capability (I did not notice it in any of the
READ-MEs).

   As always, thanks for your help!

   Clint

------------------------------

Date: Wed, 04 Oct 1995 13:21:24 CDT
From: "Bruce A. Bromberek" <[e-mail]>
Subject: Alert Sounds.

Fellow Netizins

How many times has this happen to you.  Your working on your Mac,
listening to a CD via the speakers.  Suddenly without warning you are
deafened by an unexpected beep from an over exuberant program.  My
question is:  Is there a way to have the alert sounds go through
the internal speakers, instead of my attached speakers, ideally at
differnet volumes.
--
Bruce Bromberek - [e-mail] - U of MN - ChE & Mat Sci
Why are drug addicts and computer aficionados both called users? - C. Stoll

------------------------------

Date: Wed, 4 Oct 1995 01:34:38 -0800
From: [e-mail] (R.N.Adams,II)
Subject: CorelDRAW! reader for Mac

>Is there a program out there that can interpret CorelDRAW! formatted files for
>the Mac?  The latest version of GraphicConverter (2.1.5, that I know of)
>doesn't recognize it; at least in PC form.

Sort of. CorelDRAW! files can export to Adobe Illustrator 3.0 format, and
can be read by the Mac version of Illustrator. I work in an all-Mac
electronic prepress department, and being MacSnobs(tm), we despise CD.
However, some of our customers use CD, and we have had some success with
filed exported as above.

>My wife and I are buying a Performa 636CD, but since she does her graphics on
>a IBM PC, we need to resolve the compatability issues.  Fortunately, she
>produces her newsletters, information sheets, house organs, etc. in PageMaker
>5.0, which we have for the Mac.  We just can't seem to locate a program that
>will interpret her CD's full of Corel formatted clip art.  As far as I can
>tell, there's no CorelDRAW! for the Mac out there.

As far as I know, Corel has been working on a Mac version of CD for about
fifty years now, but they don't seem too anxious to finish the project; the
competition between existing graphic design programs on the Mac may be
keeping them at bay, although I've heard that CD is pretty feature-laden
(and remember, I'm a MacSnob(tm)...).

So, I guess you'll have to have your wife export images to Illustrator in
order to use them from the CD's; not exactly convenient.

Hope this helps,

R.N.Adams,II
<[e-mail]>
Blake Printery
2222 Beebee Street
San Luis Obispo, CA 93401

------------------------------

Date: Wed, 4 Oct 1995 17:58:29 +0100
From: [e-mail] (Nicola Evoli)
Subject: Info-Mac Digest V13 #105

To ALL.
I am experiencing repeated troubles with my US ROBOTICS MAC & FAX 28.8
together with my Macintosh LC. I have no problem to connect with Internet
or to run the MCC software to fax all my messages. However several times,
after Internet sessions, either the fax is disconnected or it is jammed by
scheduled transmissions. I guess it is due to the string given to the PPP
config or to the modem via MCC. Is anyone available to suggest the most
appropriate string for both?
Thank you in advance.

NICOLA EVOLI
[e-mail]

------------------------------

Date: Wed, 4 Oct 1995 11:37:24 -0400
From: [e-mail] (Irwin Mortman)
Subject: Info-Mac Digest V13 #112

>Date: Mon, 2 Oct 1995 17:16:58 -0700
>From: [e-mail] (Jim Beall)
>Subject: [Q] Sick Apple 20" Display Diagnosis needed
>
>We have a couple-of-year old Apple 20" color display which has gone on the
>blink and I'm wondering if anyone out there has seen similar symptoms:
>
>when cold starting the Mac (Quadra 950) the monitor's green power on LED
>comes on for a second or so then dims to off. For the past couple of
>months, repeating this cold start procedure would eventually get the
>monitor to 'catch' and come on. Now it won't.
>
>The Mac operates just fine with an Apple 15"display. The shop wants to
>start ordering cables, power boards, .... I thought someone might have a
>hint as to where to start or might tell me which dumb thing I am doing
>wrong.
>
>thanks in advance,
>
>
>- Jim Beall  303-497-5989
>  [e-mail]

Srange, I have a similar problem with a 14" monitor that came with my IIVX.
At startup, the indicator light on the monitor comes on, but the screen
does not . During bootup, or after the MAC is fully booted, if I press the
monitor on/off button once or several times the monitor comes on. So far
the monitor has been in to repair shops with no luck in fixing the problem.
If I shut down and start up within 10 minutes everything works as it
supposed to. But after 10 minutes the above problem repeats it self.
Any ideas.

Irwin Mortman
Voice 513-891-7359
FAX    [phone]
E-Mail [e-mail]
Cincinnati, OH

------------------------------

Date: Wed, 4 Oct 1995 05:40:34 -0700
From: [e-mail]
Subject: Info-Mac Problems on eWorld

I used to receive my Info-Mac (and TidBITS) subscription copies at eWorld in
several e-mail sections. That worked fine.

But currently eWorld is sending only the first portion (20-25K) via e-mail
and and the rest as a MIME file that should be able to be decoded by an
application called Mpack. But something is wrong and Mpack is not able to
decode it.

eWorld is working on a permanent solution, but in the meantime they suggest a
replacing all of the "/r's" in the file with a carriage return. It works!

Regards, Bob.

------------------------------

Date: Wed, 4 Oct 1995 08:14:18 -0500
From: [e-mail] (Gib Henry)
Subject: Macsbug: duplicate dcmds/named Vol/VBL/Printf/File/Drvr

My Duo 230 system is generally stable, but when I do have an occasional
crash and drop into the debugger, the Macsbugs screen contains the
following lines:

You have duplicate dcmds
You have duplicate named Vol
You have duplicate VBL
You have duplicate Printf
You have duplicate File
You have duplicate Drvr

Can anyone shed any light on what's wrong, and how to fix it?

Cheers!
--
Gib Henry

------------------------------

Date: Wed, 4 Oct 95 08:52:21 CDT
From: Mike Sisson <[e-mail]>
Subject: PlainTalk Capabilities

I was browsing through the MacFACTS database recently submitted to the
archives. There is a checkbox under Software for "PlainTalk Capable" which
the Help section defines as "Capable of Speech Recognition". This box IS NOT
checked for the Performa 5200 and 6200 series although they come with a
PlainTalk microphone (the 5200 has it built in). I thought speech recognition
was software based. I don't understand why if you have a microphone, the
software and a processor with enough horsepower, you can't do speech
recognition. Someone please enlighten me. BTW, the "Plaintalk Capable" box IS
checked for the PM 6100,7100,8100,7200,7500,8500,9500 series along with some of
the high end Quadra and Centris series machines as I would expect.

Mike Sisson: Finger my account for my PGP public key and other minutia
Internet:    [e-mail]
PGPrint:     E3 65 66 0F 4E 99 3F E0  23 DB D8 23 0D 41 F8 EA
X.400:       g=Mike;s=Sisson;ou1=E157368;p=Vought;a=ATTMAIL;c=US

------------------------------

Date: Wed, 4 Oct 1995 15:33:19 -0400 (EDT)
From: [e-mail] (Michael DePaola)
Subject: Quadra 610 Ethernet

I have a Quadra (Centris) 610 that did not ship with the built in ethernet.
Now, I'd like to add ethernet to it.  I went out, got the NuBus adapter for the
system from Apple and I bought a third party twisted pair NuBus card.  Now, how
do I make it work?  It doesn't seem to do anything.  I've tried the third party
driver instalation, I've tried Apple's NSI and nothing works.  Can someone
please tell me what I'm doing wrong?

-Mike

------------------------------

Date: Wed, 4 Oct 1995 09:15:55 +0200
From: [e-mail] (Kauko Saarinen)
Subject: System 7.5.1 update problem: Mac IIcx

Hi fellow experts!

The System 7.5 was installed on Mac IIcx, no problems. Then the update 7.5
->7.5.1 was installed.

After the update you get the error message ``bus error'' when you shut down
the machine or restart it.

The Mac IIcx is connected to Ethernet by FastPath and LocalTalk. We are
using here the Finnish language version of the MacOS.

Any suggestions? (I tried the clean installation, too.)

Kauko

--------------------------------

--Info-Mac-Digest--

End of Info-Mac Digest
******************************